Transport Terminals Mod 1.7.10, 1.7.2

Transport Terminals Mod 1.7.10, 1.7.2 is a utility mod which allows for easy teleportation travel – even across dimensions.

Transport Terminals Mod

Transport Terminals now uses RF to power most things in the mod. All the RF settings for teleport usage and block storage are configurable. However if you do not have any RF – don’t panic! The mod will check and if the RF lib is not available it will work without it.

There are 3 things you will need to craft in order to use this mod:

The Transport Terminal Console.

A Transport Terminal Remote.

A bunch of Transport Terminal Chips.


After crafting all the necessary bits, place the console block down where you want it. (make sure you leave an empty space x1 block by x2 blocks high in front of the console). Next, right click on the console block. This will open the console main GUI. In the GUI you will see, on the left side, 2 slots and an arrow. Place your remote in to the top slot and drag the remote from the bottom slot out. This has now linked your remote to that console. Now, when you right click that remote, you will be teleported directly to that console. Good stuff. Next, grab some of the chips you made and start filling the 2 rows of other slots. Each one of those slots has a button above or below it. Your Transport Terminal set up is now ready to use.

Basic Usage:

To save a location you wish to teleport back to just Sneak + Right Click with the remote on a block.

If you have blank chips in your console a text box ‘naming’ GUI will open for you.

After typing the location name – just click the ‘save’ button on the top left.
The location will be saved to the console and recorded on the 1st available blank chip.

To teleport back to a location saved on to a chip open the console GUI and press
the button for the slot which contains the chip. Simple.

Wireless Console Interface.

The Wireless Console Interface is crafted like this:

This Item is linked to Consoles in exactly the same way standard remotes are.

Wireless interfaces are not used for recording they do however allow you to access it’s linked console’s chips and functions.

Once a Wireless interface has been liked with a console if you right click it, it will open the gui of it’s linked console.

 Chip Utilities Block. Copy, Erase and Advanced Chip Usage.

The Chip Utilities Block is can be crafted thusly:

This Block will allow you to edit chip usage by Copying Chips, Erasing old used Chips and Naming Player chips for advanced usage. All three functions have an associated button in the gui.

Copying Chips

Sometimes it’s nice to have backups, consoles in different locations with the same chip or even share locations.

All chips can be copied in the Chip Utilities Block by placing the original in the 1st slot and an equivalent ‘blank’ version in the 2nd slot.

Press the copy button and the data will be applied from the 1st chip to the second. Easy.

Erasing Old Chips

Placing a used chip in the left slot and clicking erase will blank the chip and move it to the second slot.

This will work with both Standard Chips and Player Chips.

 Advanced Usage

By placing a blank Player Location Chip in the 1st slot and then pressing ‘name’ you will be prompted with a GUI. This GUI is used to record a player’s name to the chip. Player location chips are used for teleporting to a player’s location, if used in a console, or teleporting players to a Player Summoner Block.

 Player Summon Block and Player Location Chips.

Player Chips are crafted like this:

Player Location chips are used for teleporting to players and teleporting players to your location. The player chips can be named in the Chip Utilities Block or you can use an Anvil if you want to spend XP.

The main block is crated like so:

This block was made in order that player rescue is possible (not for griefing). The block and player chips can be disabled in the mod’s configuration file – just in case…

By placing an already recorded player location chip in to the Player Summon Block and pressing the ‘Teleport’ button, the named player will be teleported from their location to the location of the block. If the Player Location chip is placed in a Console Block the opposite effect is achieved and you will be teleported to the current location of the player on the chip.

 RF Charger Block.

This Block is an RF only option. It must be powered by RF.

The block itself is crafted like this:

Redstone, Gold, Quartz, Lapiz Blocks & 4 Standard Chips.

This block will charge any RF items that are placed in to it, if it has sufficient power in it.

There are 6 slots available for use.

Transport Terminals Mod Installation

  1. First you need download and install Minecraft Forge.
  2. Then download this Minecraft mod file at link below.
  3. Go to %appdata%. It can also be found by searching for “%appdata%” in your start menu.
  4. Go to .minecraft/mods folder.
  5. If the “mods” folder does’nt exist in your PC, you’ll need create one.
  6. Then drag and drop the downloaded .jar (or .zip) file into mods folder.
  7. Enjoy.

Download Transport Terminals Mod

Transport Terminals Mod 1.7.10, 1.7.2

Leave a Reply

Your email address will not be published. Required fields are marked *