RapidForm Mod 1.10.2, 1.9.4

RapidForm Mod 1.10.2, 1.9.4 is a collection of wands for creative mode.  It is used for creating all types of interesting structures. It can make buildings, tunnels, roads, towers, walls and other interesting effects. It works on vanilla blocks and doesn’t need any other mods except forge. It has a very useful and nifty undo wand which lets you try out new things without making permanent changes to your world. Most wands are activated by right clicking on the ground or a block. Hovering over a wand should show a tool tip with the current settings.

RapidForm Mod (2) RapidForm Mod (3) RapidForm Mod (4) RapidForm Mod (5) RapidForm Mod (1)


  • Undo wand: Most importantly there is a wand that support a generic Undo function and will undo things done by other tools. Note, the undo wand will only “remember” the things done while the server is running. So if you quit the game the undo stack will be lost. Also, as the undo wand remembers all block modified, it can consume a lot of memory from large operations or done for a long time. All tools support the undo function so keep the undo wand handy. The undo wand can be cleared by shift-right-click the air. For OS X shift-right-click.
  • Aging Wand: Right clicking on stone brick, sandstone or red standstone will “age it” converting blocks to cracked or rough blocks. Works particularly well with stone brick. This will NOT grow grass.
  • Bridge Wand: This wand creates bridges of varying type. Each click will create a new span which will automatically send a support post down until it reaches the ground.
  • Castle Wands: A set of wands with a variety of castle parts for making your own castle. There are walls, tower parts, towers and gatehouses. Also try with the aging wand and the the “wall” mode of the bridge.
  • Circle Wand: The circle wand creates circles of varying sizes ( radius and height ) around the click point. This is useful for creating tower and defensive wall sections.
  • Clear Terrain Wand: Clear terrain of EVERYTHING that is not surface.
  • Converter Wand: This wand is used to convert blocks touched from one type to another. It will convert the block touched and all contiguous blocks of the same type to the selected type. By default this is air.To select a new type of block to convert to, shift right click on the desired block type. To revert to air, shift right click in the air to reset to air. Clicking on the ground has interesting effects, but can consume a lot of memory.
  • CopyPaste Wand: This is a very powerful wand but takes a little instruction. To mark the area to copy, place a frame of some sort of block around the are to be copied. The frame needs to have only one leg in each dimension and they must touch. Each leg should be one block longer that the area to be copied, including one block below and above. See the screen shot section for an example of the frame. Once the frame has been constructed, shift-right-click on the frame to copied. The point clicked is how the shape will be placed.
  • Fill Wand: This wand fills areas below the click area either with water or a right-clicked substance. This is useful for filling in or fixing water areas or filling terrian. Also useful for making floating islands with the landing pad wand.
  • Hilltown Wands: A variety of sizes of building structures types to construction Italian Hilltowns.
  • Landing Pad Wand: Right clicking in the air will create a dirt block under your feet.
  • Mineshaft Wand: Digs a big mineshaft with spiral stairs all the way down to a y-value of 11.
  • Move Wand: This wand is used to deconstruct and reconstruct all sorts of blocks. Great for moving islands. Be careful to not select too much.
  • Remove Water Wand: Removes water blocks in an area. Great for draining ponds, rivers and oceans to building things on the bottom. Use the fill wand afterwards to rebuild the water.
  • Road Wand: Creates a road or wall (if height is specified) following the landscape. In the basic mode, the road is straight and goes the specific length. Waypoints can be set by shift right clicking the ground. Then when a right click is performed, a wall will be created following the points in reverse order. (Therefore going to the last point first.) The current curve algorithm only works along the four cardinal directions and will not “turn corners.” (That is for a later version.) Will also fill water which is great for streams.
  • Sculpt Terrain Wand: Used for raising and lower terrain. Great when used before smoothing to shape the terrain.
  • Ship Wand: For now only has a prototype medium ship. More to come!
  • Smooth Terrain Wand: Great for smoothing terrain after sculpting.
  • Spreader Wand: Spreads the currently clicked block our around it the click point to the specified radius. Works horizontal or vertical. Great for filling in gaps, smoothing or extending walls or surfaces.
  • Tower Wand: Creates a fairly significant tower on the space specified. There are many options on available via right click.
  • Tunnel Wand: Creates some basic tunnel shapes such as a mining tunnel and some railroad tunnels.
  • Village Wand: Supports all the vanilla village building types int the basic plains and desert styles and also in a stone brick style. Has modes for plains, desert, stone and prismarine!

RapidForm Mod Installation

  1. First you need download and install Minecraft Forge.
  2. Then download this Minecraft mod file at link below.
  3. Go to %appdata%. It can also be found by searching for “%appdata%” in your start menu.
  4. Go to .minecraft/mods folder.
  5. If the “mods” folder does’nt exist in your PC, you’ll need create one.
  6. Then drag and drop the downloaded .jar (or .zip) file into mods folder.
  7. Enjoy.

Download RapidForm Mod

One thought on “RapidForm Mod 1.10.2, 1.9.4

Leave a Reply

Your email address will not be published. Required fields are marked *